回覆至：MP510-20 實體網路無法連線

[encorej58844]

one@DD2116:~$ sudo dmesg > dmesg.log
[sudo] one 的密碼：
one@DD2116:~$ sudo dmesg
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[ 0.000000] Linux version 6.12.25-mp510+ (jb@JB87) (aarch64-linux-gnu-gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP Sat May 3 06:02:09 CST 2025
[ 0.000000] Machine model: MapleBoard.org MP510
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000e4800000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000e4800000..0x00000000f47fffff (262144 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000005000000..0x00000000052fffff (3072 KiB) nomap non-reusable secmon@5000000
[ 0.000000] OF: reserved mem: 0x0000000005300000..0x00000000072fffff (32768 KiB) nomap non-reusable secmon@5300000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000f4beefff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x00000000f4beefff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4beefff]
[ 0.000000] On node 0, zone DMA: 13329 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 31 pages/cpu s87448 r8192 d31336 u126976
[ 0.000000] pcpu-alloc: s87448 r8192 d31336 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: root=UUID=54fb5216-72a6-4598-9563-ce8ffd37220f rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=5e:0c:a8:44:6f:7b
[ 0.000000] Unknown kernel command line parameters “cgroup_enable=memory cgroup_memory=1 mac=5e:0c:a8:44:6f:7b”, will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1002479
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 3MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000e0200000-0x00000000e0600000] (4MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000429] Console: colour dummy device 80×25
[ 0.000445] printk: legacy console [tty0] enabled
[ 0.000839] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000869] pid_max: default: 32768 minimum: 301
[ 0.002858] LSM: initializing lsm=capability,selinux
[ 0.004455] SELinux: Initializing.
[ 0.008789] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.008818] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.040387] rcu: Hierarchical SRCU implementation.
[ 0.040421] rcu: Max phase no-delay instances is 1000.
[ 0.041958] EFI services will not be available.
[ 0.044061] smp: Bringing up secondary CPUs …
[ 0.056482] Detected VIPT I-cache on CPU1
[ 0.056599] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[ 0.068502] Detected VIPT I-cache on CPU2
[ 0.068601] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[ 0.076601] Detected VIPT I-cache on CPU3
[ 0.076692] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[ 0.076775] smp: Brought up 1 node, 4 CPUs
[ 0.076838] SMP: Total of 4 processors activated.
[ 0.076848] CPU: All CPU(s) started at EL2
[ 0.076859] CPU features: detected: 32-bit EL0 Support
[ 0.076868] CPU features: detected: 32-bit EL1 Support
[ 0.076880] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.076894] CPU features: detected: Common not Private translations
[ 0.076905] CPU features: detected: CRC32 instructions
[ 0.076920] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.076932] CPU features: detected: Privileged Access Never
[ 0.076943] CPU features: detected: RAS Extension Support
[ 0.076998] alternatives: applying system-wide alternatives
[ 0.077989] Memory: 3576936K/4009916K available (19200K kernel code, 3584K rwdata, 9564K rodata, 2048K init, 675K bss, 166504K reserved, 262144K cma-reserved)
[ 0.079658] devtmpfs: initialized
[ 0.093556] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.093606] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.098173] 23936 pages in range for non-PLT usage
[ 0.098194] 515456 pages in range for PLT usage
[ 0.098923] prandom: seed boundary self test passed
[ 0.100286] prandom: 100 self tests passed
[ 0.100341] pinctrl core: initialized pinctrl subsystem
[ 0.101067] DMI not present or invalid.
[ 0.103453] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.104785] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.105774] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.106871] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.106950] audit: initializing netlink subsys (disabled)
[ 0.107219] audit: type=2000 audit(0.104:1): state=initialized audit_enabled=0 res=1
[ 0.107768] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.107823] cpuidle: using governor ladder
[ 0.108036] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.108169] ASID allocator initialised with 65536 entries
[ 0.108389] Serial: AMBA PL011 UART driver
[ 0.115251] /soc/bus@ff600000/hdmi-tx@0: Fixed dependency cycle(s) with /soc/vpu@ff900000
[ 0.115729] /soc/vpu@ff900000: Fixed dependency cycle(s) with /soc/bus@ff600000/hdmi-tx@0
[ 0.115772] /soc/interrupt-controller@ffc01000: Fixed dependency cycle(s) with /soc/interrupt-controller@ffc01000
[ 0.116505] /soc/bus@ff600000/hdmi-tx@0: Fixed dependency cycle(s) with /soc/vpu@ff900000
[ 0.116945] /soc/bus@ff600000/hdmi-tx@0: Fixed dependency cycle(s) with /soc/vpu@ff900000
[ 0.124405] /soc/bus@ff600000/hdmi-tx@0: Fixed dependency cycle(s) with /soc/vpu@ff900000
[ 0.124527] /soc/vpu@ff900000: Fixed dependency cycle(s) with /soc/bus@ff600000/hdmi-tx@0
[ 0.128200] /soc/vpu@ff900000: Fixed dependency cycle(s) with /cvbs-connector
[ 0.128300] /cvbs-connector: Fixed dependency cycle(s) with /soc/vpu@ff900000
[ 0.128507] /soc/bus@ff600000/hdmi-tx@0: Fixed dependency cycle(s) with /hdmi-connector
[ 0.128599] /hdmi-connector: Fixed dependency cycle(s) with /soc/bus@ff600000/hdmi-tx@0
[ 0.137995] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.138027] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.138044] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.138057] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.138069] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.138080] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.138095] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.138106] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.144964] cryptd: max_cpu_qlen set to 1000
[ 0.212594] raid6: neonx8 gen() 2225 MB/s
[ 0.280677] raid6: neonx4 gen() 2171 MB/s
[ 0.348766] raid6: neonx2 gen() 2078 MB/s
[ 0.416859] raid6: neonx1 gen() 1729 MB/s
[ 0.484948] raid6: int64x8 gen() 1393 MB/s
[ 0.553038] raid6: int64x4 gen() 1526 MB/s
[ 0.621110] raid6: int64x2 gen() 1473 MB/s
[ 0.689212] raid6: int64x1 gen() 1108 MB/s
[ 0.689227] raid6: using algorithm neonx8 gen() 2225 MB/s
[ 0.757274] raid6: …. xor() 1691 MB/s, rmw enabled
[ 0.757291] raid6: using neon recovery algorithm
[ 0.757586] ACPI: Interpreter disabled.
[ 0.758527] iommu: Default domain type: Translated
[ 0.758550] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.759556] SCSI subsystem initialized
[ 0.759765] libata version 3.00 loaded.
[ 0.759999] usbcore: registered new interface driver usbfs
[ 0.760047] usbcore: registered new interface driver hub
[ 0.760089] usbcore: registered new device driver usb
[ 0.760534] mc: Linux media interface: v0.10
[ 0.760664] videodev: Linux video capture interface: v2.00
[ 0.760766] pps_core: LinuxPPS API ver. 1 registered
[ 0.760781] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.760808] PTP clock support registered
[ 0.760850] EDAC MC: Ver: 3.0.0
[ 0.761284] scmi_core: SCMI protocol bus registered
[ 0.761737] Advanced Linux Sound Architecture Driver Initialized.
[ 0.762822] vgaarb: loaded
[ 0.763219] clocksource: Switched to clocksource arch_sys_counter
[ 0.766455] VFS: Disk quotas dquot_6.6.0
[ 0.766507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.766921] pnp: PnP ACPI: disabled
[ 0.776165] NET: Registered PF_INET protocol family
[ 0.776422] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.780171] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.780226] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.780249] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.780442] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.781183] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.781674] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear)
[ 0.781868] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.781939] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.782210] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.782249] NET: Registered PF_XDP protocol family
[ 0.782277] PCI: CLS 0 bytes, default 64
[ 0.782526] Trying to unpack rootfs image as initramfs…
[ 0.786275] kvm [1]: nv: 554 coarse grained trap handlers
[ 0.786729] kvm [1]: IPA Size Limit: 40 bits
[ 0.786812] kvm [1]: vgic interrupt IRQ9
[ 0.786871] kvm [1]: VHE mode initialized successfully
[ 0.789803] Initialise system trusted keyrings
[ 0.790100] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 0.790179] zbud: loaded
[ 0.793017] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.794570] fuse: init (API version 7.41)
[ 0.795429] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 0.855306] NET: Registered PF_ALG protocol family
[ 0.855453] xor: measuring software checksum speed
[ 0.856818] 8regs : 2430 MB/sec
[ 0.858178] 32regs : 2451 MB/sec
[ 0.859529] arm64_neon : 2454 MB/sec
[ 0.859560] xor: using function: arm64_neon (2454 MB/sec)
[ 0.859593] Key type asymmetric registered
[ 0.859608] Asymmetric key parser ‘x509’ registered
[ 0.859953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
[ 0.860230] io scheduler mq-deadline registered
[ 0.860247] io scheduler kyber registered
[ 0.860425] io scheduler bfq registered
[ 0.902308] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.912747] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.922806] soc soc0: Amlogic Meson SM1 (Unknown) Revision 2b:c (81:2) Detected
[ 0.924842] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 0.927481] Serial: AMBA driver
[ 0.928238] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 0.928301] printk: legacy console [ttyAML0] enabled
[ 1.536407] Freeing initrd memory: 20504K
[ 1.547715] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 15, base_baud = 1500000) is a meson_uart
[ 2.133083] random: crng init done
[ 2.137842] brd: module loaded
[ 2.197800] loop: module loaded
[ 2.204106] usbcore: registered new interface driver cdc_wdm
[ 2.204190] usbcore: registered new interface driver usb-storage
[ 2.210223] usbcore: registered new interface driver usbserial_generic
[ 2.216664] usbserial: USB Serial support registered for generic
[ 2.222648] usbcore: registered new interface driver ch341
[ 2.228108] usbserial: USB Serial support registered for ch341-uart
[ 2.234342] usbcore: registered new interface driver cp210x
[ 2.239889] usbserial: USB Serial support registered for cp210x
[ 2.245778] usbcore: registered new interface driver ftdi_sio
[ 2.251497] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 2.258780] usbcore: registered new interface driver garmin_gps
[ 2.264671] usbserial: USB Serial support registered for Garmin GPS usb/tty
[ 2.271616] usbcore: registered new interface driver ipw
[ 2.276893] usbserial: USB Serial support registered for IPWireless converter
[ 2.284001] usbcore: registered new interface driver opticon
[ 2.289631] usbserial: USB Serial support registered for opticon
[ 2.295615] usbcore: registered new interface driver pl2303
[ 2.301158] usbserial: USB Serial support registered for pl2303
[ 2.307052] usbcore: registered new interface driver qcaux
[ 2.312512] usbserial: USB Serial support registered for qcaux
[ 2.318329] usbcore: registered new interface driver qcserial
[ 2.324049] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.330983] usbcore: registered new interface driver symbolserial
[ 2.337039] usbserial: USB Serial support registered for symbol
[ 2.343615] mousedev: PS/2 mouse device common for all mice
[ 2.349585] meson-vrtc ff8000a8.rtc: registered as rtc0
[ 2.353677] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[ 2.361907] i2c_dev: i2c /dev entries driver
[ 2.367332] debugfs: Directory ‘ff800280.cec’ with parent ‘regmap’ already present!
[ 2.374020] Registered IR keymap rc-cec
[ 2.377531] rc rc0: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc0
[ 2.386256] input: meson_g12a_ao_cec as /devices/platform/soc/ff800000.bus/ff800280.cec/rc/rc0/input0
[ 2.399418] sdhci: Secure Digital Host Controller Interface driver
[ 2.401402] sdhci: Copyright(c) Pierre Ossman
[ 2.405761] Synopsys Designware Multimedia Card Interface Driver
[ 2.412114] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.418110] meson-sm: secure-monitor enabled
[ 2.422069] hid: raw HID events driver (C) Jiri Kosina
[ 2.426799] usbcore: registered new interface driver usbhid
[ 2.432265] usbhid: USB HID core driver
[ 2.443094] Initializing XFRM netlink socket
[ 2.443296] NET: Registered PF_INET6 protocol family
[ 2.489368] Segment Routing with IPv6
[ 2.489420] RPL Segment Routing with IPv6
[ 2.491473] In-situ OAM (IOAM) with IPv6
[ 2.495459] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.502186] NET: Registered PF_PACKET protocol family
[ 2.506251] NET: Registered PF_KEY protocol family
[ 2.511147] 8021q: 802.1Q VLAN Support v1.8
[ 2.524902] registered taskstats version 1
[ 2.525066] Loading compiled-in X.509 certificates
[ 2.546602] zswap: loaded using pool zstd/zbud
[ 2.547139] Key type .fscrypt registered
[ 2.550349] Key type fscrypt-provisioning registered
[ 2.555823] Btrfs loaded, zoned=no, fsverity=no
[ 2.602390] alg: No test for 842 (842-scomp)
[ 2.609230] alg: No test for 842 (842-generic)
[ 2.616029] “cryptomgr_test” (200) uses obsolete ecb(arc4) skcipher
[ 2.794432] meson-drm ff900000.vpu: Queued 2 outputs on vpu
[ 2.819274] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 2.824125] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 2.831771] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
[ 2.838919] meson-drm ff900000.vpu: DSI transceiver device is disabled
[ 2.846017] [drm] Initialized meson 1.0.0 for ff900000.vpu on minor 0
[ 3.462827] Console: switching to colour frame buffer device 170×48
[ 3.480061] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
[ 3.490100] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
[ 3.493792] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
[ 3.499928] meson8b-dwmac ff3f0000.ethernet: IRQ sfty not found
[ 3.506020] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
[ 3.512842] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 3.518915] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
[ 3.524111] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
[ 3.531551] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
[ 3.539006] meson8b-dwmac ff3f0000.ethernet: COE Type 2
[ 3.544208] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
[ 3.551224] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
[ 3.557641] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
[ 3.563536] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
[ 3.569338] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.579729] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
[ 3.582504] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
[ 3.590932] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
[ 3.594938] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
[ 3.602233] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 3.610299] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 3.614643] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[ 3.622162] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000808000000010
[ 3.631416] xhci-hcd xhci-hcd.3.auto: irq 21, io mem 0xff500000
[ 3.637435] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[ 3.642909] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
[ 3.650372] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[ 3.657023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 3.665104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.672291] usb usb1: Product: xHCI Host Controller
[ 3.677144] usb usb1: Manufacturer: Linux 6.12.25-mp510+ xhci-hcd
[ 3.683214] usb usb1: SerialNumber: xhci-hcd.3.auto
[ 3.688579] hub 1-0:1.0: USB hub found
[ 3.691829] hub 1-0:1.0: 2 ports detected
[ 3.696260] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 3.703962] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 3.712073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.719281] usb usb2: Product: xHCI Host Controller
[ 3.724118] usb usb2: Manufacturer: Linux 6.12.25-mp510+ xhci-hcd
[ 3.730184] usb usb2: SerialNumber: xhci-hcd.3.auto
[ 3.735635] hub 2-0:1.0: USB hub found
[ 3.738806] hub 2-0:1.0: 1 port detected
[ 3.749613] meson-gx-mmc ffe03000.mmc: allocated mmc-pwrseq
[ 3.749690] meson-gx-mmc ffe05000.mmc: Got CD GPIO
[ 3.845942] mmc0: Failed to initialize a non-removable card
[ 3.917230] clk: Disabling unused clocks
[ 3.917974] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
[ 3.919291] PM: genpd: Disabling unused power domains
[ 3.936031] ALSA device list:
[ 3.938889] No soundcards found.
[ 3.959841] Freeing unused kernel memory: 2048K
[ 3.961156] Run /init as init process
[ 3.963412] with arguments:
[ 3.963419] /init
[ 3.963424] with environment:
[ 3.963427] HOME=/
[ 3.963431] TERM=linux
[ 3.963434] cgroup_enable=memory
[ 3.963438] cgroup_memory=1
[ 3.963441] mac=5e:0c:a8:44:6f:7b
[ 3.971282] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 4.086430] mmc2: new HS200 MMC card at address 0001
[ 4.089195] mmcblk2: mmc2:0001 CKTM4R 58.2 GiB
[ 4.093002] mmcblk2: p1 p2
[ 4.094889] mmcblk2boot0: mmc2:0001 CKTM4R 4.00 MiB
[ 4.100164] mmcblk2boot1: mmc2:0001 CKTM4R 4.00 MiB
[ 4.104912] mmcblk2rpmb: mmc2:0001 CKTM4R 16.0 MiB, chardev (236:0)
[ 4.110371] usb 1-1: New USB device found, idVendor=0b05, idProduct=18f0, bcdDevice= 0.00
[ 4.118146] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.125270] usb 1-1: Product: 802.11n NIC
[ 4.129227] usb 1-1: Manufacturer: Realtek
[ 4.133297] usb 1-1: SerialNumber: 107C6130A9D4
[ 4.259387] usb 1-2: new high-speed USB device number 3 using xhci-hcd
[ 4.403542] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 4.407128] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.414260] usb 1-2: Product: USB2.0 HUB
[ 4.457193] hub 1-2:1.0: USB hub found
[ 4.458318] hub 1-2:1.0: 4 ports detected
[ 4.851242] usb 1-2.3: new low-speed USB device number 4 using xhci-hcd
[ 5.056491] usb 1-2.3: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[ 5.059288] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.066570] usb 1-2.3: Product: USB Keyboard
[ 5.070818] usb 1-2.3: Manufacturer: SEM
[ 5.164013] input: SEM USB Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.0/0003:1A2C:2124.0001/input/input1
[ 5.315945] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-xhci-hcd.3.auto-2.3/input0
[ 5.325768] input: SEM USB Keyboard Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.1/0003:1A2C:2124.0002/input/input2
[ 5.395576] input: SEM USB Keyboard System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.3/1-2.3:1.1/0003:1A2C:2124.0002/input/input3
[ 5.406161] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-xhci-hcd.3.auto-2.3/input1
[ 5.595247] usb 1-2.4: new full-speed USB device number 5 using xhci-hcd
[ 5.603953] EXT4-fs (mmcblk2p2): mounted filesystem 54fb5216-72a6-4598-9563-ce8ffd37220f r/w with writeback data mode. Quota mode: none.
[ 5.790594] usb 1-2.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[ 5.790615] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.790623] usb 1-2.4: Product: USB Receiver
[ 5.790629] usb 1-2.4: Manufacturer: Logitech
[ 5.900219] input: Logitech USB Receiver as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.4/1-2.4:1.0/0003:046D:C52B.0003/input/input4
[ 6.091618] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.4/input0
[ 6.107992] input: Logitech USB Receiver Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input5
[ 6.125107] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input6
[ 6.195576] input: Logitech USB Receiver System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.4/1-2.4:1.1/0003:046D:C52B.0004/input/input7
[ 6.212920] hid-generic 0003:046D:C52B.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.4/input1
[ 6.229031] hid-generic 0003:046D:C52B.0005: hiddev97,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.4/input2
[ 6.341397] systemd[1]: System time before build time, advancing clock.
[ 6.448311] systemd[1]: systemd 252.38-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 6.479691] systemd[1]: Detected architecture arm64.
[ 6.514761] systemd[1]: Hostname set to <DD2116>.
[ 7.361599] systemd[1]: Queued start job for default target graphical.target.
[ 7.407318] systemd[1]: Created slice system-getty.slice – Slice /system/getty.
[ 7.413348] systemd[1]: Created slice system-modprobe.slice – Slice /system/modprobe.
[ 7.427600] systemd[1]: Created slice system-serial\x2dgetty.slice – Slice /system/serial-getty.
[ 7.441388] systemd[1]: Created slice user.slice – User and Session Slice.
[ 7.452963] systemd[1]: Started systemd-ask-password-wall.path – Forward Password Requests to Wall Directory Watch.
[ 7.469602] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount – Arbitrary Executable File Formats File System Automount Point.
[ 7.486984] systemd[1]: Expecting device dev-ttyAML0.device – /dev/ttyAML0…
[ 7.497041] systemd[1]: Reached target integritysetup.target – Local Integrity Protected Volumes.
[ 7.511464] systemd[1]: Reached target nss-user-lookup.target – User and Group Name Lookups.
[ 7.525375] systemd[1]: Reached target remote-fs.target – Remote File Systems.
[ 7.535476] systemd[1]: Reached target slices.target – Slice Units.
[ 7.547313] systemd[1]: Reached target swap.target – Swaps.
[ 7.558432] systemd[1]: Reached target veritysetup.target – Local Verity Protected Volumes.
[ 7.570175] systemd[1]: Listening on systemd-fsckd.socket – fsck to fsckd communication Socket.
[ 7.581297] systemd[1]: Listening on systemd-initctl.socket – initctl Compatibility Named Pipe.
[ 7.593469] systemd[1]: Listening on systemd-journald-audit.socket – Journal Audit Socket.
[ 7.604175] systemd[1]: Listening on systemd-journald-dev-log.socket – Journal Socket (/dev/log).
[ 7.615725] systemd[1]: Listening on systemd-journald.socket – Journal Socket.
[ 7.626363] systemd[1]: Listening on systemd-udevd-control.socket – udev Control Socket.
[ 7.636411] systemd[1]: Listening on systemd-udevd-kernel.socket – udev Kernel Socket.
[ 7.667515] systemd[1]: Mounting dev-hugepages.mount – Huge Pages File System…
[ 7.679043] systemd[1]: Mounting dev-mqueue.mount – POSIX Message Queue File System…
[ 7.692850] systemd[1]: Mounting sys-kernel-debug.mount – Kernel Debug File System…
[ 7.706485] systemd[1]: Mounting sys-kernel-tracing.mount – Kernel Trace File System…
[ 7.724907] systemd[1]: Starting keyboard-setup.service – Set the console keyboard layout…
[ 7.738370] systemd[1]: Starting kmod-static-nodes.service – Create List of Static Device Nodes…
[ 7.752618] systemd[1]: Starting modprobe@configfs.service – Load Kernel Module configfs…
[ 7.767161] systemd[1]: Starting modprobe@dm_mod.service – Load Kernel Module dm_mod…
[ 7.781206] systemd[1]: Starting modprobe@drm.service – Load Kernel Module drm…
[ 7.790958] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 7.794376] systemd[1]: Starting modprobe@efi_pstore.service – Load Kernel Module efi_pstore…
[ 7.814275] systemd[1]: Starting modprobe@fuse.service – Load Kernel Module fuse…
[ 7.827478] systemd[1]: Starting modprobe@loop.service – Load Kernel Module loop…
[ 7.837422] systemd[1]: systemd-fsck-root.service – File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 7.861678] systemd[1]: Starting systemd-journald.service – Journal Service…
[ 7.876194] systemd[1]: Starting systemd-modules-load.service – Load Kernel Modules…
[ 7.890515] systemd[1]: Starting systemd-remount-fs.service – Remount Root and Kernel File Systems…
[ 7.906485] systemd[1]: Starting systemd-udev-trigger.service – Coldplug All udev Devices…
[ 7.921690] systemd[1]: Mounted dev-hugepages.mount – Huge Pages File System.
[ 7.932219] systemd[1]: Mounted dev-mqueue.mount – POSIX Message Queue File System.
[ 7.945417] systemd[1]: Mounted sys-kernel-debug.mount – Kernel Debug File System.
[ 7.956774] systemd[1]: Mounted sys-kernel-tracing.mount – Kernel Trace File System.
[ 7.967979] EXT4-fs (mmcblk2p2): re-mounted 54fb5216-72a6-4598-9563-ce8ffd37220f r/w. Quota mode: none.
[ 7.972859] systemd[1]: Finished keyboard-setup.service – Set the console keyboard layout.
[ 7.990034] systemd[1]: Finished kmod-static-nodes.service – Create List of Static Device Nodes.
[ 8.001474] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 8.010392] systemd[1]: Finished modprobe@configfs.service – Load Kernel Module configfs.
[ 8.022874] systemd[1]: Started systemd-journald.service – Journal Service.
[ 8.179001] systemd-journald[395]: Received client request to flush runtime journal.
[ 8.184463] systemd-journald[395]: File /var/log/journal/54fb521672a645989563ce8ffd37220f/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 9.316326] systemd-journald[395]: Failed to read journal file /var/log/journal/54fb521672a645989563ce8ffd37220f/user-1000.journal for rotation, trying to move it out of the way: Device or resource busy
[ 9.744844] Adding 2097148k swap on /var/swap. Priority:-2 extents:27 across:13508608k SS
[ 10.118740] logitech-djreceiver 0003:046D:C52B.0005: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.3.auto-2.4/input2
[ 10.275564] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.293431] Registered IR keymap rc-x96max
[ 10.328209] input: Logitech Wireless Device PID:407b Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:407B.0006/input/input10
[ 10.388046] IR NEC protocol handler initialized
[ 10.443990] rc rc1: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc1
[ 10.462988] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[ 10.476484] input: Logitech Wireless Device PID:407b Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:407B.0006/input/input11
[ 10.479562] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc1/input9
[ 10.498365] hid-generic 0003:046D:407B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:407b] on usb-xhci-hcd.3.auto-2.4/input2:1
[ 10.511545] rc rc1: sw decoder init
[ 10.529003] meson-ir ff808000.ir: receiver initialized
[ 10.648751] axg-sound-card sound: workaround active: internal PCM chmap controls mapped to device 0
[ 10.874482] panfrost ffe40000.gpu: clock rate = 24000000
[ 10.888005] NET: Registered PF_QIPCRTR protocol family
[ 10.966464] panfrost ffe40000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
[ 10.970547] panfrost ffe40000.gpu: features: 00000000,000027f7, issues: 00000000,00000400
[ 10.978750] panfrost ffe40000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[ 10.990538] panfrost ffe40000.gpu: shader_present=0x1 l2_present=0x1
[ 11.030548] [drm] Initialized panfrost 1.2.0 for ffe40000.gpu on minor 1
[ 11.142596] meson8b-dwmac ff3f0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 11.319026] meson8b-dwmac ff3f0000.ethernet eth0: PHY [mdio_mux-0.0:00] driver [JL2xxx Gigabit Ethernet 1.2.9] (irq=POLL)
[ 11.327346] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[ 11.327371] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[ 11.418949] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[ 11.429653] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.530525] Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 11.534929] Loaded X.509 cert ‘wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600′
[ 11.556695] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 11.598752] usb 1-1: This Realtek USB WiFi dongle (0x0b05:0x18f0) is untested!
[ 11.602363] usb 1-1: Please report results to Jes.Sorensen@gmail.com
[ 11.672519] usb 1-1: Dumping efuse for RTL8188EU (0x200 bytes):
[ 11.674601] 00000000: 29 81 00 6c 0b 00 00 00 00 0c 00 00 00 00 00 00 )..l…………
[ 11.681601] input: Logitech MX Vertical as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-2/1-2.4/1-2.4:1.2/0003:046D:C52B.0005/0003:046D:407B.0006/input/input15
[ 11.682592] 00000010: 2a 2a 29 28 27 27 31 31 31 2f 2f f1 ff ff ff ff **)(”111//…..
[ 11.707016] 00000020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.714989] 00000030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.722969] 00000040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.730934] 00000050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.738917] 00000060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.746881] 00000070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.754855] 00000080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.762828] 00000090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.770801] 000000a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.778785] 000000b0: ff ff ff ff ff ff ff ff 22 23 1c 00 00 00 00 00 ……..”#……
[ 11.786749] 000000c0: 00 01 00 10 00 00 00 00 00 03 0c ff ff ff ff ff …………….
[ 11.794748] 000000d0: 05 0b f0 18 42 66 00 10 7c 61 30 a9 d4 09 03 52 ….Bf..|a0….R
[ 11.802695] 000000e0: 65 61 6c 74 65 6b 0d 03 38 30 32 2e 31 31 6e 20 ealtek..802.11n
[ 11.810673] 000000f0: 4e 49 43 00 ff ff ff ff ff ff ff ff ff ff ff ff NIC………….
[ 11.818642] 00000100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.826615] 00000110: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.834588] 00000120: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.842565] 00000130: 81 ae 96 2d 03 93 96 11 fc 8c 00 11 9b ff ff ff …-…………
[ 11.850537] 00000140: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.858508] 00000150: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.866481] 00000160: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.874455] 00000170: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.882430] 00000180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.890401] 00000190: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.898374] 000001a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.906349] 000001b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.914321] 000001c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.922295] 000001d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.930268] 000001e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.938241] 000001f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 11.946224] usb 1-1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[ 11.955405] usb 1-1: RTL8188EU MAC: 10:7c:61:30:a9:d4
[ 11.960434] usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin
[ 11.970714] usb 1-1: Firmware revision 11.1 (signature 0x88e1)
[ 11.977983] usb 1-1: rtl8xxxu_writeN: Failed to write block at addr: 1180 size: 0080
[ 11.981168] rtl8xxxu 1-1:1.0: probe with driver rtl8xxxu failed with error -11
[ 11.988351] usbcore: registered new interface driver rtl8xxxu
[ 12.067849] logitech-hidpp-device 0003:046D:407B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Vertical] on usb-xhci-hcd.3.auto-2.4/input2:1
[ 14.903385] fe.dai-link-1: ASoC: no backend DAIs enabled for fe.dai-link-1, possibly missing ALSA mixer-based routing or UCM profile
[ 26.079752] rfkill: input handler disabled
[ 39.894270] logitech-hidpp-device 0003:046D:407B.0006: HID++ 4.5 device connected.
[ 83.731031] usb 1-1: USB disconnect, device number 2
[ 85.295283] usb 1-1: new high-speed USB device number 6 using xhci-hcd
[ 85.431618] usb 1-1: New USB device found, idVendor=0b05, idProduct=18f0, bcdDevice= 0.00
[ 85.434175] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 85.441363] usb 1-1: Product: 802.11n NIC
[ 85.445316] usb 1-1: Manufacturer: Realtek
[ 85.449381] usb 1-1: SerialNumber: 107C6130A9D4
[ 85.455111] usb 1-1: This Realtek USB WiFi dongle (0x0b05:0x18f0) is untested!
[ 85.461140] usb 1-1: Please report results to Jes.Sorensen@gmail.com
[ 85.524766] usb 1-1: Dumping efuse for RTL8188EU (0x200 bytes):
[ 85.525061] 00000000: 29 81 00 6c 0b 00 00 00 00 0c 00 00 00 00 00 00 )..l…………
[ 85.533106] 00000010: 2a 2a 29 28 27 27 31 31 31 2f 2f f1 ff ff ff ff **)(”111//…..
[ 85.541022] 00000020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.549015] 00000030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.556981] 00000040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.564944] 00000050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.572937] 00000060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.580895] 00000070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.588867] 00000080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.596836] 00000090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.604816] 000000a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.612784] 000000b0: ff ff ff ff ff ff ff ff 22 23 1c 00 00 00 00 00 ……..”#……
[ 85.620759] 000000c0: 00 01 00 10 00 00 00 00 00 03 0c ff ff ff ff ff …………….
[ 85.628737] 000000d0: 05 0b f0 18 42 66 00 10 7c 61 30 a9 d4 09 03 52 ….Bf..|a0….R
[ 85.636706] 000000e0: 65 61 6c 74 65 6b 0d 03 38 30 32 2e 31 31 6e 20 ealtek..802.11n
[ 85.644708] 000000f0: 4e 49 43 00 ff ff ff ff ff ff ff ff ff ff ff ff NIC………….
[ 85.652669] 00000100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.660624] 00000110: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.668609] 00000120: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.676565] 00000130: 81 ae 96 2d 03 93 96 11 fc 8c 00 11 9b ff ff ff …-…………
[ 85.684550] 00000140: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.692512] 00000150: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.700497] 00000160: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.708458] 00000170: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.716444] 00000180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.724405] 00000190: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.732388] 000001a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.740361] 000001b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.748328] 000001c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.756318] 000001d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.764282] 000001e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.772274] 000001f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 85.780233] usb 1-1: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[ 85.789420] usb 1-1: RTL8188EU MAC: 10:7c:61:30:a9:d4
[ 85.794453] usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin
[ 85.801266] usb 1-1: Firmware revision 11.1 (signature 0x88e1)
[ 87.785268] wlan0: authenticate with 40:ee:15:9c:37:88 (local address=10:7c:61:30:a9:d4)
[ 87.787790] wlan0: send auth to 40:ee:15:9c:37:88 (try 1/3)
[ 87.801165] wlan0: authenticated
[ 87.801660] wlan0: associating to AP 40:ee:15:9c:37:88 with corrupt probe response
[ 87.807274] wlan0: associate with 40:ee:15:9c:37:88 (try 1/3)
[ 87.817923] wlan0: RX AssocResp from 40:ee:15:9c:37:88 (capab=0x421 status=0 aid=5)
[ 87.820792] usb 1-1: rtl8xxxu_bss_info_changed: HT supported
[ 87.827475] wlan0: associated
[ 87.911098] warning: `ThreadPoolForeg’ uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 6304.169901] usb 1-1: USB disconnect, device number 6
[ 6304.195616] wlan0: deauthenticating from 40:ee:15:9c:37:88 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6304.266248] usb 1-1: disconnecting
[ 6306.988863] usb 1-2: USB disconnect, device number 3
[ 6306.988916] usb 1-2.3: USB disconnect, device number 4
[ 6307.244559] usb 1-2.4: USB disconnect, device number 5
[ 6308.207504] usb 1-1: new high-speed USB device number 7 using xhci-hcd
[ 6308.343780] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 6308.346343] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6308.353479] usb 1-1: Product: USB2.0 HUB
[ 6308.393177] hub 1-1:1.0: USB hub found
[ 6308.393299] hub 1-1:1.0: 4 ports detected
[ 6308.779503] usb 1-1.4: new full-speed USB device number 8 using xhci-hcd
[ 6308.971070] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
[ 6308.973817] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6308.981109] usb 1-1.4: Product: USB Receiver
[ 6308.985344] usb 1-1.4: Manufacturer: Logitech
[ 6309.109025] logitech-djreceiver 0003:046D:C52B.0009: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-xhci-hcd.3.auto-1.4/input2
[ 6309.235906] input: Logitech MX Vertical as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.4/1-1.4:1.2/0003:046D:C52B.0009/0003:046D:407B.000A/input/input16
[ 6309.321095] logitech-hidpp-device 0003:046D:407B.000A: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Vertical] on usb-xhci-hcd.3.auto-1.4/input2:1
[ 6309.544618] usb 1-1.3: new low-speed USB device number 9 using xhci-hcd
[ 6309.748517] usb 1-1.3: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[ 6309.751253] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6309.758554] usb 1-1.3: Product: USB Keyboard
[ 6309.762790] usb 1-1.3: Manufacturer: SEM
[ 6309.836236] input: SEM USB Keyboard as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.0/0003:1A2C:2124.000B/input/input17
[ 6309.952014] hid-generic 0003:1A2C:2124.000B: input,hidraw2: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-xhci-hcd.3.auto-1.3/input0
[ 6309.962236] input: SEM USB Keyboard Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:1A2C:2124.000C/input/input18
[ 6310.027955] input: SEM USB Keyboard System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.3.auto/usb1/1-1/1-1.3/1-1.3:1.1/0003:1A2C:2124.000C/input/input19
[ 6310.038499] hid-generic 0003:1A2C:2124.000C: input,hidraw3: USB HID v1.10 Device [SEM USB Keyboard] on usb-xhci-hcd.3.auto-1.3/input1
[ 6315.627447] usb 1-2: new high-speed USB device number 10 using xhci-hcd
[ 6315.767780] usb 1-2: New USB device found, idVendor=0b05, idProduct=18f0, bcdDevice= 0.00
[ 6315.770329] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6315.777464] usb 1-2: Product: 802.11n NIC
[ 6315.781447] usb 1-2: Manufacturer: Realtek
[ 6315.785513] usb 1-2: SerialNumber: 107C6130A9D4
[ 6315.791318] usb 1-2: This Realtek USB WiFi dongle (0x0b05:0x18f0) is untested!
[ 6315.797279] usb 1-2: Please report results to Jes.Sorensen@gmail.com
[ 6315.885342] usb 1-2: Dumping efuse for RTL8188EU (0x200 bytes):
[ 6315.885643] 00000000: 29 81 00 6c 0b 00 00 00 00 0c 00 00 00 00 00 00 )..l…………
[ 6315.893682] 00000010: 2a 2a 29 28 27 27 31 31 31 2f 2f f1 ff ff ff ff **)(”111//…..
[ 6315.901644] 00000020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.909588] 00000030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.917557] 00000040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.925548] 00000050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.933506] 00000060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.941473] 00000070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.949445] 00000080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.957418] 00000090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.965389] 000000a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6315.973365] 000000b0: ff ff ff ff ff ff ff ff 22 23 1c 00 00 00 00 00 ……..”#……
[ 6315.981336] 000000c0: 00 01 00 10 00 00 00 00 00 03 0c ff ff ff ff ff …………….
[ 6315.989315] 000000d0: 05 0b f0 18 42 66 00 10 7c 61 30 a9 d4 09 03 52 ….Bf..|a0….R
[ 6315.997290] 000000e0: 65 61 6c 74 65 6b 0d 03 38 30 32 2e 31 31 6e 20 ealtek..802.11n
[ 6316.005267] 000000f0: 4e 49 43 00 ff ff ff ff ff ff ff ff ff ff ff ff NIC………….
[ 6316.013255] 00000100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.021206] 00000110: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.029180] 00000120: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.037154] 00000130: 81 ae 96 2d 03 93 96 11 fc 8c 00 11 9b ff ff ff …-…………
[ 6316.045131] 00000140: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.053095] 00000150: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.061069] 00000160: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.069047] 00000170: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.077023] 00000180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.084992] 00000190: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.092962] 000001a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.100943] 000001b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.108919] 000001c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.116887] 000001d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.124861] 000001e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.132830] 000001f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff …………….
[ 6316.140837] usb 1-2: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[ 6316.149996] usb 1-2: RTL8188EU MAC: 10:7c:61:30:a9:d4
[ 6316.155035] usb 1-2: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin
[ 6316.161889] usb 1-2: Firmware revision 11.1 (signature 0x88e1)
[ 6316.867267] logitech-hidpp-device 0003:046D:407B.000A: HID++ 4.5 device connected.
[ 6317.988280] wlan0: authenticate with 40:ee:15:9c:37:88 (local address=10:7c:61:30:a9:d4)
[ 6317.990748] wlan0: send auth to 40:ee:15:9c:37:88 (try 1/3)
[ 6318.004460] wlan0: authenticated
[ 6318.004923] wlan0: associating to AP 40:ee:15:9c:37:88 with corrupt probe response
[ 6318.011423] wlan0: associate with 40:ee:15:9c:37:88 (try 1/3)
[ 6318.022242] wlan0: RX AssocResp from 40:ee:15:9c:37:88 (capab=0x421 status=0 aid=5)
[ 6318.024971] usb 1-2: rtl8xxxu_bss_info_changed: HT supported
[ 6318.032270] wlan0: associated
[ 6691.911390] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up – 1Gbps/Full – flow control rx/tx
[ 6761.546078] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
one@DD2116:~$